LED Status Lights on Z-Balun Products

LED Status Lights on Z-Balun Products

The LED status lights on the Z-Baluns are an indication of the signal measurement between the Z-Distribution unit and the Z-Balun device, as calculated by the Z-Balun itself. In a perfect environment, the lights also correlate to the physical distance between the Z-Distribution Unit and the Z-Balun (See Chart Below). A RED LED on the Z-Balun indicates that the signal coming into the Z-Balun is strong and the balun device is probably a short distance from the Z-Distribution unit. A GREEN LED indicates that there is a significant loss of signal and suggests the balun device is at a much greater distance from the Z-Distribution unit. There are two other LEDs (AMBER and YELLOW), which indicate the intermediate distances. 

Below is a table which lists the four LEDs and their corresponding calculated distances:
LED INDICATOR
DISTANCE / CABLE LENGTH
RED
<   35 meters
AMBER
>= 35 meters and < 65 meters
YELLOW
>= 65 meters and < 80 meters
GREEN
>= 80 meters


*Z-Balun Powered Baluns were formerly known as the Z-Band GigaBOB product line. The contents of this article also applies to the powered GigaBOB product line (P/N# HZ 5002-1 and HZ 5002-2)
    • Related Articles

    • LED Status Lights on UNV series of Z-Balun products

      The LED status lights on the UNV Series of Z-Baluns are an indication of the signal measurement between the Z-Distribution unit and the Z-Balun device, as calculated by the Z-Balun itself. In a perfect environment, the lights also correlate to the ...
    • PUSH Button Usage and Manual Mode on Z-Balun UNV

      The UNV series of baluns have a recessed push button labeled A located on the same face as that of LEDs on the chassis. Depending on how long the duration of the button press is, this button has three use cases which are outlined below. Momentary ...
    • Compatibility of Various Z-Band Baluns with Z-Distribution Units

      A Z-Band Balun, also referred to as a Z-Balun is a required component of the Z-TV systems. This device is located at the endpoint to receive an RF signal over a a category cable coming off of a Z-Distribution unit and it can be connected to a TV, a ...