Popular Articles
LED Status Lights on UNV series of Z-Balun products
The LED status lights on the UNV Series of Z-Baluns are an indication of the signal measurement between the Z-Distribution unit and the Z-Balun device, as calculated by the Z-Balun itself. In a perfect environment, the lights also correlate to the ...
Encode 300 - Accessing the UI
Setup Information Plug in your Source (HDMI/HD-SDI/Serial (Component/Composite) Plug in your Ethernet Cable Plug in the Power At this point the unit should do the following: The unit will start up with a blinking Green power LED on the front of ...
RF Power Level Recommendations
Coax Systems: When using a coax feed as an input to a 'Main' Z-Band video distribution unit, the RF signal level needs to be a FLAT ~ 20 dBmV for Digital Channels. FLAT usually refers to the signal levels being constant across the active RF ...
Amino H150 IP Configuration and Channel Set-Up
1. Connect a USB keyboard, HDMI and Ethernet cable(optional) to the Amino and then power it on. The USB keyboard must be connected before powering on the unit for the Amino to recognize it. 2. After you reach the Amino home screen, Press “ALT+ M”. ...
Z-IP Decode 400 - Updating the IP Address
The devices ship with DHCP enabled as the default. Here are the two methods to updated the IP address of the devices. Online: make sure pop ups are enabled log into the device https://ipaddress/ a pop up will request username and password U: ...